Table of Contentsfor Book Step by Step Design a House withAutoCad Architecture
1. - Introduction 2. - Create the Plans 2.1 - Create the Basement Plans 2.1.1 - Create the Basement Outline 2.1.2 - Basement - Exterior Walls 2.1.3 - Basement - Interior walls 2.1.4 - Basement - Doors -Windows 2.1.5 - Basement - Create the Slabs 2.1.6 - Create the Interior Stair 2.1.67 - Open a Hole on the Slab
2.2 - Ground Floor plan 2.2.1 - The Ground Floor Outline 2.2.2 - Ground Floor - Exterior walls 2.2.3 - Ground Floor - Interior walls 2.2.4 - Create the Doors - Windows 2.2.5 - Ground Floor - Create Slabs 2.2.6 - Ground Floor - Interior stair 2.2.7 - Open a Hole on the Slab 2.2.7 - Create the Exterior Stair
2.3. - First Floor Plan 2.3.1 - Outline of the First Floor 2.3.2 - First Floor - Exterior walls 2.3.3 - First Floor - Interior walls 2.3.4 - First Floor - Doors - windows 2.3.5 - First Floor - The roof slabs 2.3.6 - Open a Hole for the roof slab 2.3.7 - Create the floor Slab for Attic 2.3.8 - Create the stair for to Attic 2.3.9 - Open a Hole on Slab for Stair
2.4. - Create Roof and Attic 2.4.1 - Create the Roof 2.4.2 - Design the Attic 2.4.3 - Expand the Walls to Roof 2.4.4 - Create the Dormer 3. - Design the Site Plan 3.1 - Create the 2D Site Plan 3.2. - Create the 3D Terrain 3.2.1 - Modify the 3D Terrain
4. - Drawing Mangement 4.1 - Creating the project h21155 4.1.2 - Define the levels5. - Construct Drawings 5.1 - Basement Construct 5.2 - Ground Floor Construct 5.3 - First Floor construct 5.4 - Roof construct 5.5 - Site Plan construct
5.6 - Create the Spaces 5.6.1 - Spaces of the Basement 5.6.2 - Spaces of the Ground floor 5.6.3 - Spaces of the First floor 5.6.4 - Spaces of the Attic6. - Create the View Drawings 6.1. - Create the Plan Views 6.1.1 - Basement Plan View 6.1.2 - Ground Floor Plan View 6.1.3 - First Floor Plan View
6.1.4 - Roof Plan View 6.1.5 - Site Area View 6.2. - 3D View drawing 6.2.1 - Create 3D View 6.3. - Add the Tags 6.3.1 - Add the RoomTags 6.3.2 - Door and Window Tags7. - Sections and Elevations 7.1.1 - Create the Section A-A 7.1.2 - Create the Elevations
8. - Create the Sheets 8.1.1 - Basement Sheet 8.1.2 - Createa new Sheet 9. - Adding Schedules 9.1 - Door - Windows Schedule 9.1.1 - Window Schedule 9.1.2 - Door Schedule 9.2 - Room Finish Schedule 9.2.1 - Edit Room Finish Schedule 10. - Plotting the drawings